Prestigio RoadRunner 585 - Device Settings; Video Settings; General Settings

User Manual RoadRunner 585
4
3
3. Settings
Before recording, you can set up the device according to your requirements.
- In video/picture preview mode, press [MENU]/ to enter
video/picture settings, press [OK] to go the general settings, press
[MENU] / three times to exit.
- In setting list, use [ ]/ [ ] to navigate the menu, press [OK] to get
the options and confirm the selection, press [MENU]/ to exit.
Video Settings
Video resolution: Select the resolution of recorded video: 2560x1080 30p, 2304x1296 30p,
1920x1080 45p, HDR 1920x1080 30p, 1920x1080 30p
Recycle record: Set the video duration (1, 3, 5 minutes or off) for loop recording.
When the micro SD card is full, the device will delete the oldest unlocked video files automatically.
WDR setting: On/Off
HDR setting: On/Off
White Balance: Auto/Incandescent/Sunny/Cloudy/Fluorescent
Select an appropriate white balance, so images have a true-to-life color range. It is for specific
lighting situations.
Image quality：Set the photo quality: S Fine、Fine、Normal
EV bias: Exposure compensation. Select from EV- 2.0, EV- 5/3, EV- 4/3, EV- 1.0, EV- 2/3, EV- 1/3,
EV0.0, EV+1/3, EV+2/3, EV+1.0, EV+4/3, EV+5/3, EV+2.0.
Set exposure value to determine how much light the camera’s sensor receives. For lowlight situations,
use a higher exposure.
Motion Detection: Turn on or off motion detection.
If there is any motion detected while car DVR has power but not recording, your car DVR will start
recording automatically.
Mic setup：On/Off
Set to record sound or not.
Stamp setting: Add Date/time/plate number/logo stamp into videos.
Driving time warning：Off/1 Hour/2 Hours/3 Hours/4 Hours
G-Sensor setting：Off/ High/ Medium/Low
Select the sensitivity of the G-sensor. The smaller the number is, the higher the sensitivity is.
When reaching the sensitive value (such as collision), the recording file will be automatically protected.
Park mode: Off/On
Parking monitor function is triggered by the G-sensor in the unit. When G-sensor is OFF, the parking
monitor and CPU will not work. When it is ON, unit will be switched to Parking Monitor Mode after
shutting off.
Front Motion Detection: Off/ On
Alerting the driver to movement detected in front of the car.
Light sensor: Off/ On
The function warns you when it detects low light conditions.
General Settings
Language: Choose your language.
Time setup: Set time on device.
Date Format: Select date format.
Beep sound setting: Turn on or off the sound when pressing buttons.