Prevue Hendryx 91340 User Manual

C
USTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
1 (312) 243-3624
ONLINE
www.prevuepet.com
EMAIL
customerservice @ prevuepet.com
1804 +91340—03/20—A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
91340
Instructions online at www.prevuepet.com
MODEL #
Flight Cage
ASSEMBLY
1
PIECES
2
PIECES
1
2
3
4
5
Place the removable grille
into the base.
Slide the removable
tray into the opening.
Add the back panel to the 3-panel
mesh. Start at the bottom and
weave the alternating hooks
together up the seam.
Done correctly, the seam will
look like this →
Weave the panels together
on the remaining seam by the
same method.
Add the assembled mesh to the
base, by inserting the extended
loops along the sides into the open
slots on the base.
Along the front and back edges,
set the mesh between the raised
tabs and the rim.
18041804
MODEL #

Prevue Hendryx 91340 Specifications

General

Brand	Prevue Hendryx
Model	91340
Category	Farm Equipment
Language	English

Summary

Cage Base Preparation

Install Base Grille and Tray

Place the removable grille into the base and slide the removable tray into the opening.

Main Cage Assembly

Weave and Attach Cage Panels

Add the back panel to the 3-panel mesh, weave alternating hooks, and attach the assembled mesh to the base.

Final Assembly Steps

Install Perches and Cups

Install perches on horizontal wires at equal height and insert cups into the cup doors.

Attach Cage Roof

Catch the roof on the looped hooks along the side, front, back panels, and finish on the opposite end.

Cleaning Instructions

Recommended Cleaning Procedures

Use a soft cloth and mild soap with warm water. Hand dry completely; do not leave plastic parts in the sun.