Prevue Hendryx Hampton Deluxe F075

Need help?

Do you have a question about the Prevue Hendryx Hampton Deluxe F075 and is the answer not in the manual?

Summary

Hampton Deluxe Divided Breeding Cage F075 Parts List

Hampton Deluxe Divided Breeding Cage F075 Assembly

Step 1: Assemble Cage Body

Assemble the cage body upside down by securing side panels to front panel with hex screws.

Step 2: Install Tray Channels and Rails

Install tray channel rails and square rails to the upside-down cage body using hex screws.

Hampton Deluxe Divided Breeding Cage F075 Assembly Continued

Step 3: Insert Perches and Trays

Insert perches into wires and slide grilles and trays into channels, then insert food/water cups.

Step 4: Attach Roof and End Caps

Set the roof panel, secure with corner brackets and screws, and tap end caps onto frame corners.

How to Stack Assembled Units

Prepare Bottom Unit for Stacking

Remove endcaps and corner screws from the bottom unit, then insert plastic connector posts.

Stack Top Unit and Secure

Replace screws on the bottom unit, then slide the top unit's frame corners over the connector posts.

This document provides a comprehensive guide for the assembly, use, and maintenance of the Hampton Deluxe Divided Breeding Cage, Model F075, and also details how to stack it with other Hampton Deluxe Cages (F070 + F075).

Function Description:

The Hampton Deluxe Divided Breeding Cage (F075) is designed as a versatile enclosure for birds, particularly suitable for breeding purposes due to its divided interior. It can be used as a single large cage or divided into two separate spaces using a center divider grille. The cage is also designed to be stackable with other Hampton Deluxe Cages (F070 and F075), allowing for the creation of multi-level housing units.

Important Technical Specifications:

Model Number: F075
Components: The cage includes various panels (BACK, RIGHT Side, CORE Center, FRONT, LEFT Side), grilles, trays, a divider, perches, cups, and a roof panel.
Hardware: Assembly requires hex screws, corner brackets, endcaps, an Allen wrench, and plastic connectors (for stacking).
Interchangeable Parts: The LEFT Side Panel (L) and RIGHT Side Panel (R) are interchangeable. CORE Center Parts (C1, C2, C3, C4, C5) are interchangeable. Grilles (G) and Trays (T) are also interchangeable.
Stacking Capacity: Up to three cage units can be stacked safely. It is explicitly stated not to exceed three stacked cages.

Usage Features:

Divided Interior: The cage comes with a center divider grille (D) that can be slipped into place to create two separate spaces, ideal for breeding pairs or separating birds. Alternatively, the divider can be left out for full-cage use, providing a larger single enclosure.
Easy Access for Feeding/Watering: Slotted perches are inserted onto vertical wires and rest on horizontal wires or frame rails. Cup doors slide up to allow insertion of food/water cups, which are then held in place by the closed door.
Removable Grilles and Trays: Grilles (G) slide into top channels and trays (T) slide into bottom channels for each cage side. These are secured by a grille/tray lock that rotates out of the way for removal. This design facilitates easy cleaning and maintenance.
Assembly Process:
- Initial Assembly (F075): The cage body is assembled upside down to facilitate the attachment of panels and tray channel rails. The grille/tray tracks face the interior. Panels are secured with hex screws.
- Tray Channel Rails: Two tray channel rails are installed while the cage body is upside down, attached with hand-tightened hex screws. Subsequently, square rails are installed and secured with hex screws using the hex key.
- Uprighting the Cage: Once the main body and rails are in place, the cage body is flipped upright.
- Perches and Cups: Perches are inserted into vertical wires, and food/water cups are placed into their designated slots, secured by the cup doors.
- Grilles and Trays: Grilles and trays are slid into their respective channels and locked into place.
- Divider: The center divider grille can be inserted or removed as needed.
- Roof Panel: The roof panel (C6) is placed on top.
- Corner Brackets: Corner screws are backed out, corner brackets are slipped over the corners, and the screws are tightened to secure the brackets.
- End Caps: End caps are tapped into each frame corner (top and bottom) to complete the assembly.
Stacking Feature (F070 + F075):
- Preparation: To stack, endcaps must be removed from the top unit's footer and the bottom unit's top. Hex screws from the bottom unit's top corners are also removed.
- Plastic Connectors: Plastic connector posts are inserted into the frame corners of the bottom unit. An installation tip advises using the Allen wrench to prevent the connector from going too deep and to align holes.
- Re-securing: Hex screws are replaced on the bottom unit, ensuring corner brackets remain in place.
- Stacking: The frame corners of the top unit are slid over the connector posts of the bottom unit.
- Tools for Stacking: An Allen wrench is essential, and a screwdriver or pliers may be helpful for removing endcaps.

Maintenance Features:

Removable Grilles and Trays: The design allows for easy removal of grilles and trays, simplifying the cleaning process and maintaining hygiene within the cage.
Durable Construction: The use of hex screws and corner brackets ensures a secure and stable structure, contributing to the cage's longevity.
Customer Support: Prevue Pet Products offers customer support via phone (1 (312) 243-3624), online (www.prevuepet.com), and email (customerservice@prevuepet.com) for assistance or replacement parts.
Online Instructions: Detailed instructions are available online at www.prevuepet.com, providing a readily accessible resource for assembly and troubleshooting.