13
Colt www.pridemobility.com
II. SAFETY
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level surfaces com-
posed of concrete, blacktop or tarmac. However, Pride recognises that there will be times when you will encounter
other surface types. For this reason, your scooter is designed to perform admirably on packed soil, grass and
gravel. Feel free to use your scooter safely on lawns and in park areas.
! Reduce your scooter’s speed when driving on uneven terrain and/or soft surfaces.
! Avoid tall grass that can become tangled in the running gear.
! Avoid loosely packed gravel and sand.
! If you feel unsure about a driving surface, avoid that surface.
PUBLIC STREETS AND ROADWAYS
WARNING! Exercise extreme caution when operating the scooter on footpaths, pavements,
bridleways, pedestrian areas and roads. Obey the Code of Practice for Class 3 vehicle
users.
NOTE: A copy of the Department of Transportation, Code of Practice for Class 3 vehicle users, may be
obtained by contacting your authorised Pride Dealer.
STATIONARY OBSTACLES (STEPS, KERBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges and/or drop-offs (kerbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately high.
WARNING! Do not attempt to have your scooter proceed rearward down any step, kerb or
other obstacle. This may cause the scooter to tip.
WARNING! Be sure your scooter is traveling perpendicular to any kerb you may be required
to ascend or descend. See figures 3 and 3A.
WARNING! Do not attempt to negotiate a kerb that has a height greater than 5 cm (2 in.).
Figure 3. Correct Kerb Approach Figure 3A. Incorrect Kerb Approach
To Next Page
Loading...
