EasyManuals Logo

Pride Mobility Go Go ES User Manual

Pride Mobility Go Go ES
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
Go-Go ES www.pridemobility.com
Follow these easy steps to charge your batteries safely:
1. Position your Travel Scooter close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the drive (rearward) position.
4. Plug the charger power cord into the charger power cord receptacle on your Travel Scooter, then into
the electrical outlet. We recommend that you charge the batteries for 8 to 14 hours. See figure 10.
NOTE: The LED lights on the charger indicate different charger conditions at various times: charger
power on, charging in progress, and charging complete. Refer to the operating instructions supplied
with the charger for a complete explanation of these indicators.
5. When the batteries are fully charged, unplug the charger power cord from the electrical outlet and then
from the charger power cord receptacle.
NOTE: There is a charger inhibit function on your Travel Scooter. The Travel Scooter will not run and
the battery condition meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your Travel Scooter’s battery voltage is low, the charger works harder, sending more electrical
current to the batteries to bring up their charge. As the batteries approach a full charge, the charger sends
less and less electrical current. When the batteries are fully charged, the current sent from the charger is at
nearly zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your Travel
Scooter’s batteries, but does not overcharge them. Refer to the manual supplied with the battery charger
for charging instructions.
What if my Travel Scooter’s batteries will not charge?
Ensure that the fuse on the tiller console is in working condition. See figure 6.
Ensure both ends of the charger power cord are inserted fully.
Can I use a different charger?
Chargers are selected precisely for particular applications and are especially matched to the type, size,
and chemical formulation of specific batteries. For the safest and most efficient charging of your
Travel Scooter’s batteries, we recommend use of the charger supplied as original equipment with your
Pride product only. Any charging method resulting in batteries being charged individually is
especially prohibited.
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your Travel Scooter’s batteries:
All day use on a daily basis.
Infrequent or sporadic use.
IV. BATTERIES AND CHARGING

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pride Mobility Go Go ES and is the answer not in the manual?

Pride Mobility Go Go ES Specifications

General IconGeneral
BrandPride Mobility
ModelGo Go ES
CategoryScooter
LanguageEnglish

Related product manuals