EasyManua.ls Logo

Pride Mobility Go-Go Ultra X - User Manual

Pride Mobility Go-Go Ultra X
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ULTRA X
The First Name in Travel Mobility
®

Questions and Answers

  • J
    Jennifer RodriguezAug 14, 2025
    What to do if all systems on my Pride Mobility Travel Aid seem dead?
    • N
      nicholasfinleyAug 14, 2025
      If all systems on your Pride Mobility Travel Scooter appear inactive, ensure the key is in the 'on' position. Also, verify that the batteries are fully charged and that the main circuit breaker reset button is pushed in. Check that the battery pack is correctly seated and that the power down timer hasn't been activated. Finally, inspect the tiller console fuse located under the battery pack.
  • A
    Antonio ClarkeAug 18, 2025
    Why doesn't my Pride Mobility Travel Aid move when I press the throttle?
    • R
      Rachael WilliamsAug 18, 2025
      If your Pride Mobility Travel Aid doesn't move when you press the throttle, it might be because the manual freewheel lever is pushed forward, which disengages the brakes and cuts power to the motor. To fix this, pull back on the manual freewheel lever, turn the Travel Scooter off, and then back on to return to normal operation.
  • M
    millslisaAug 21, 2025
    What to do if Pride Mobility Travel Aid batteries won’t charge?
    • W
      woconnellAug 21, 2025
      If the batteries of your Pride Mobility Travel Aid won’t charge, first check the fuse on the battery pack and replace it if needed. If the charger LED's never indicate a full charge, check the fuse on the battery pack and replace it if necessary. Ensure both ends of the charger power cord are fully inserted. If the battery pack fuse continually blows, contact your authorized Pride Provider for service.
  • K
    Kendra BakerAug 25, 2025
    Why does the motor surge on my Pride Mobility Travel Aid?
    • R
      russellryanAug 25, 2025
      If the battery condition meter dips significantly and the motor surges or hesitates when you press the throttle on your Pride Mobility Travel Aid, fully charge the batteries. If the problem persists, have your authorized Pride Provider load test each battery. You can also perform the load test yourself; battery load testers are available at most automotive parts stores.
  • D
    daniel56Aug 28, 2025
    What causes the main circuit breaker to trip repeatedly on a Pride Mobility Travel Aid?
    • T
      Theresa GarciaAug 28, 2025
      If the main circuit breaker trips repeatedly on your Pride Mobility Travel Aid, it is recommended to see your authorized Pride Provider for service. Ensure you charge the Travel Scooter’s batteries more frequently. If the problem continues, have both of your Travel Scooter’s batteries load tested by your authorized Pride Provider. You may also perform the load test yourself. Battery load testers are available at most automotive parts stores.
  • K
    Kevin NunezAug 31, 2025
    What to do if controller trip is possible on Pride Mobility Travel Aid?
    • A
      Alexandria NguyenAug 31, 2025
      If a controller trip is possible on your Pride Mobility Travel Aid, shut down your Travel Scooter for a minimum of several minutes to allow the controller to cool. Or, try reinserting the key into the key switch.
  • J
    Jim HoSep 3, 2025
    How to fix solenoid brake trip on Pride Mobility Travel Aid?
    • R
      Reginald SimpsonSep 3, 2025
      If the solenoid brake trips on your Pride Mobility Travel Aid, it may be due to the manual freewheel lever being in the freewheel position. To resolve this, remove the key, then push the manual freewheel lever to the drive position, and restart your Travel Scooter.
  • D
    Deanna BuckleySep 7, 2025
    What to do if Pride Mobility Travel Aid has throttle trip?
    • S
      Scott HughesSep 7, 2025
      If a throttle trip occurs on your Pride Mobility Travel Aid because the throttle control lever may have been depressed while inserting the key, release the throttle control lever completely, then reinsert the key.
  • C
    Cynthia MaySep 10, 2025
    How to fix low battery voltage on Pride Mobility Travel Aid?
    • A
      Annette StephensSep 10, 2025
      If the battery voltage is too low to operate your Pride Mobility Travel Aid, charge it fully until the charger and any meters indicate completion.

Summary

Safety Guidelines and Product Symbols

PRODUCT SAFETY SYMBOLS

Explains symbols used in the manual and on the scooter for warnings and important information.

Your Go-Go Ultra X Travel Scooter

TILLER CONSOLE

Details the tiller console, including key switch, throttle control, horn, and battery meter.

Batteries and Charging Procedures

READING YOUR BATTERY VOLTAGE

Explains how to interpret the battery condition meter on the tiller console.

CHARGING YOUR BATTERIES

Provides essential safety precautions and mandatory instructions for charging the batteries.

BATTERY CHARGING PROCEDURE

Outlines the step-by-step procedure for safely charging the scooter's batteries.

Operating Your Travel Scooter Safely

BEFORE GETTING ONTO YOUR TRAVEL SCOOTER

Lists pre-ride checks and preparations before boarding the scooter.

GETTING ONTO AND OFF OF YOUR TRAVEL SCOOTER

Provides safety tips and steps for safely mounting and dismounting the scooter.

OPERATING YOUR TRAVEL SCOOTER

Details how to safely operate the scooter, including controls and driving position.

Basic Troubleshooting and Error Codes

DIAGNOSTIC BEEP CODES

Explains the diagnostic beep codes used to identify and resolve scooter problems.

TROUBLESHOOTING COMMON ISSUES

Guides on resolving issues like a dead system or checking fuses.

Warranty Information and Exclusions

Pride Mobility Go-Go Ultra X Specifications

General IconGeneral
TypeTravel Scooter
Weight Capacity300 lbs
Seat Depth16 inches
Ground Clearance2.5 inches
Tire TypeSolid
Battery12V
Seat Width17 inches
Heaviest Piece When Disassembled36 lbs
Charger TypeOff-board charger
Drive SystemRear-wheel drive

Related product manuals