Need help?Do you have a question about the Pride Mobility VIVALIFT and is the answer not in the manual?
General| Brand | Pride Mobility |
|---|---|
| Model | VIVALIFT |
| Category | Indoor Furnishing |
| Language | English |
Connects to charge USB enabled devices. Use MFI-certified cables for iPhones.
Buttons for controlling headrest, lumbar support, seatback, and legrest movement.
Up and Down buttons to return chair to neutral or lower it to a seated position.
Clean with water-based shampoo or foam cleaner. Avoid solvents and over-wetting.
Instructions for attaching the chair back to the base, including clip position and locking.
Plug in lumbar and headrest connectors. Headrest Only models require only the headrest plug.
Align KD sleeves and slide wing down into place, noting bracket labels.
Connect Power Transformer cable and Power Cord, then plug into an electrical outlet.
Lay seatback face down and route all cables through the wire access point.
Connect seat base, hand control, and seatback cables to the Y-cable connectors.
Connect marked cables 'A' and 'B' to control box ports and controller cable to the center connector.
To Next Page
