EasyManua.ls Logo

Pride 36 - POST-OPERATION PROCEDURES; POWER DOWN TIMER FEATURE

Pride 36
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 Travel Scooter Series
IV. OPERATION
NOTE: Your Travel Scooters reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial.
GETTING OFF OF YOUR TRAVEL SCOOTER
1. Bring your Travel Scooter to a complete stop.
2. Remove the key from the key switch.
WARNIN G! N ever att e m pt t o ge t ont o or off of your Trave l Sc oot e r w it hout rst removing t he
ke y from t he key sw it ch. T his w ill preve nt t he Trave l Sc oot er from m oving if a ccident a l t hrot t le
control leve r c ont act is m a de .
3. Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your Travel Scooter.
4. Make certain that the seat is secured into position.
5. Carefully and safely get out of the seat and stand to the side of your Travel Scooter.
6. You can leave the seat facing to the side to facilitate boarding your Travel Scooter next time.
POWER DOWN TIMER FEATURE
Your Travel Scooter is equipped with an energy saving automatic power down timer feature designed to preserve
your Travel Scooters battery life. If you mistakenly leave the key in the key switch and in the “on” position
but do not use your Travel Scooter for approximately 20 minutes, the Travel Scooters controller shuts down
automatically.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Remove the key from the key switch.
2. Reinsert the key and power up your Travel Scooter.

Related product manuals