What to do if my Pride Wrangler Scooter is completely dead?
If all systems on your Pride Scooter appear dead: * Ensure the key is in the 'on' position. * Verify the batteries are fully charged. * Press the main circuit breaker reset button. * Confirm the battery and front-to-rear harnesses are properly connected. * Check if the power down timer feature has been activated.
Why does my Pride Wrangler not move when I use the throttle?
If your Pride Scooter doesn't move when you engage the throttle control lever, push rearward on the manual freewheel lever, turn the vehicle off, and then turn it back on to return to normal operation.
How to fix low voltage on Pride Wrangler Scooter?
If you are experiencing low voltage on your Pride Scooter, charge the batteries as soon as possible.
What to do if Pride Wrangler motor surges and battery meter dips?
If the battery condition meter dips way down and the motor surges or hesitates on your Pride Scooter: * Fully charge the vehicle’s batteries. * Have your authorized dealer load test each battery.
Why does the main circuit breaker keep tripping on my Pride Wrangler?
If the main circuit breaker trips repeatedly on your Pride Scooter, charge the batteries more frequently. If the problem continues, have both of your vehicle’s batteries load tested by your authorized dealer. You may also perform the load test yourself. If it still trips, contact your authorized dealer for service.
What to do if Pride Scooter shows over voltage?
If your Pride Scooter shows an over voltage error, unplug the charger and/or turn the vehicle off, then back on.
How to fix over current on Pride Scooter?
If your Pride Scooter indicates an over current situation, turn the vehicle off for a few minutes, then turn it back on.
What to do if throttle control lever not centered at start up on Pride Scooter?
If the throttle control lever is not centered at start up on your Pride Scooter, return the throttle control lever to the center position, turn the vehicle off, then back on.
How to fix park brake fault on Pride Scooter?
To resolve a park brake fault on your Pride Scooter, remove the key from the key switch, then push the manual freewheel lever to the drive (rearward) position and restart your vehicle.
Defines the proper usage parameters for the mobility device.
Explains symbols for warnings, mandatory actions, and prohibitions.
Explains throttle control, speed settings, lighting, hazard lights, and handbrake.
How to read battery voltage and procedures for charging.
Safety checks and steps for safely mounting and dismounting.
How to operate the vehicle, including speed control and braking.
How to interpret fault codes displayed on the LCD screen.
Solutions for issues like dead systems, no movement, or circuit breaker trips.
General| Battery Voltage | 12V |
|---|---|
| Tire Size | 10 inches |
| Seat Depth | 16 inches |
| Battery Type | Deep Cycle |
| Front Wheel Size | 10 inches |
| Rear Wheel Size | 10 inches |
| Colors Available | Blue, Red |
| Charging Time | 8 hours |
To Next Page
