Pride 36 - ACCESSORIES AND FEATURES

24 Travel Scooter Series
V. COMFORT ADJUSTMENTS
SEAT SUSPENSION ADJUSTMENT (IF
EQUIPPED)
The seat post acts as a shock absorber and can be
adjusted for different degrees of ride comfort. Use
the setscrews that are visible through the adjustment
window on the side of the post as a guide when making
adjustments. Slide the rubber boot towards the top of
the post to expose the setscrews. See fi gure 26.
To make seatpost adjustments:
1. Remove the seat from the Travel Scooter.
2. Remove the upper seat post from the Travel Scooter
by removing the detent pin from the lower portion
of the seat post, then lifting the post straight up and
off the Travel Scooter. See fi gure 25.
3. Insert a 13 mm socket with an extension into the
bottom of the post. See fi gure 26.
4. Rotate clockwise to soften the ride or rotate
couterclockwise to stiffen the ride.
5. Reinstall the seat post and seat.
UNDER-SEAT STORAGE (IF EQUIPPED)
To operate under-seat storage:
1. Lift up slightly on the latch on the side of the
under-seat storage bin (see fi gure 27) and swing
the under-seat storage bin out and away from the
Travel Scooter.
2. To close the under-seat storage bin, push the under-
seat storage bin toward the center of the Travel
Scooter until you hear the latch engage.
WARNIN G! Ensure bot h unde r-se at
st ora ge bins a re latche d prior t o
operat ing your t ravel scoot e r.
To remove the under-seat storage:
1. Lift up slightly on the latch on the side of the
under-seat storage bin (see fi gure 27) and swing
the under-seat storage bin out and away from the
travel scooter until it is fully open.
2. Lift the under-seat storage bin up and off the Travel
Scooter.
To install the under-seat storage:
1. Align the slot on the under-seat storage bin over the
securement post.
2. Lower the under-seat storage pin onto the
securement post and push the under-seat storage
bin toward the center of the Travel Scooter until
you hear the latch engage.
3
2
1
Figure 26. Seat Suspension Adjustment
1. Rubber Boot
2. Setscrew
3. Ratchet Insertion Point
IDENTIFICATION KEY
1
2
Figure 27. Under-seat Storage
IDENTIFICATION KEY
1. Latch
2. Securement Post