Basic Operation Instructions 15
www.pridemobility.com GC2 Controller
SLEEP MODE
Your GC2 Controller has a sleep mode feature. Sleep mode is a built-in
circuit that automatically shuts off the main power if the joystick is not
moved in any direction for a period of time predetermined by the controller
program. When the programmed period of time is reached, the joystick will
beep and then power off. To restore power, push the on/off key.
THERMAL ROLLBACK
The GC2 controller is equipped with a thermal rollback circuit that monitors
the temperature of the chair’s motors and controller. If either exceeds the
safe operating temperature, the controller reduces the output to 50% of full
operation level. This reduces the chair’s speed and allows a cool down
period. Once the temperature returns to a safe level, the chair will resume
normal operation.
To Next Page
Loading...