• For ovens installed under the
worktop,
leave a minimum clearance
of
5
mm
between the upper edge
of
the
oven and the
lower
edge
of
the
worktop
(fig. 5). For correct operation
of
the
appliance, this
clearance
must
always
be
unobstructed.
•
If
the
kitchen unit
is
not
securely fixed
to
the wall,
it
must be anchored
with
standard brackets (A)
(fig. 6).
Electrical connection
Regulations require
that
the
appliance
be
earthed.
• Connection
to
the mains must be carried
out
by a qualified electrician in accordance
with
the
manufacturer's instructions and
in
compliance
with
local regulations.
• The installer
is
responsible
for
connecting appliances correctly
to
the mains
and
for
observing the safety
regulations.
• The oven
power
cable must be long enough
to
connect
the
built-in oven
to
the mains.
• Observance
of
safety directives requires that
an
accessible mains disconnection device
or
a multi-pole
switch
with
a minimum contact gap
of
3mm
be used
for
the
installation.
•
Do
not
use
multiple plug adapters
or
extension leads.
•
After
the
oven
has
been installed,
the
electrical components must be inaccessible.
min
5mm
5
500
6
5
··-····-···-·-····
----------