26
Models With Wire Racks
Assemble the wire racks to the oven walls using the2 screws(fig.4.1-4.2)
Slide in ,on the guides, the shelf and the tray(fig.4.3-4.4).
To dismantle, operate in reverse order.
Top oven Bottom main oven
The shelf must be fitted so that the safety catch,which stops it sliding out,
faces the inside of the oven.
Fig.4.1
Fig.4.2
Fig.4.3
Fig.4.4
27
● Switch off the oven at the power source.
● Call the service company.
● Some minor faults can be fixed by referring to the instructions given in the table
Knob are
company
Wrong function chosen.
To Next Page
Loading...
