SC15 Prisma System Control Center User Guide14
Using the settings menus
You can view and change the SC15 settings from the front
panel, remote control, or using the Prisma app.
To display the settings menu
Simultaneously press the A or V buttons on the front
panel, or press the M
ENU button on the remote control.
The settings menu is displayed:
SC15 SETTINGS 20
INPUT
AUDIO
GENERAL
To step between settings
Press the A or V buttons on the front panel or remote
control.
The current setting is shown highlighted.
To change a setting
Press the SELECTOR button on the front panel or the
SELECT button on the remote control.
The current value is shown highlighted.
Press the A or V buttons on the front panel, or the
A or V or < or > buttons on the remote control, to
change the value of the setting.
As you change it the new value is shown in the menu.
Press the S
ELECTOR button on the front panel or the
SELECT button on the remote control to save the value
you have set.
To navigate back or cancel editing a setting
Press and hold the SELECTOR button on the front panel,
or press the
button on the remote control.
To exit from the settings menu
Simultaneously press the A or V buttons on the front
panel, or press the M
ENU button on the remote control.
l
l
l
l
l
l
l
INPUT SETTINGS
The INPUT SETTINGS menu allows you to customise the
inputs to suit the sources in your system:
A1 SETTINGS 20
INPUT A1
ALIAS A1
STATUS ENABLED
INPUT
Initially the INPUT SETTINGS shows the settings for the
currently selected input. Alternatively the I
NPUT option
allows you to step between all the inputs. The subsequent
options will change according to the input.
ALIAS
Allows you to give the source a name; eg RADIO.
Highlight the ALIAS item, then press the SELECT button
on the remote control.
The R
ENAME INPUT menu is displayed:
RENAME INPUT 20
A
Press the A or V buttons on the front panel, or the <
or > buttons on the remote control, to select the first
letter.
Press the S
ELECTOR button on the front panel or the
SELECT button on the remote control, to select it.
After adding each character you have the options:
ADD
NEW CHARACTER
CONFIRM ‘A’
C
LEAR ALIAS
where C
ONFIRM shows the alias you have entered so far.
Select ADD NEW CHARACTER to add the remaining
letters, up to a maximum of six characters.
Select C
ONFIRM when you have entered the alias you
want.
l
l
l
l
l
STATUS
Choose between ENABLED (default) or DISABLED to
specify whether the input is enabled.
AUTO SENSE
Choose between: SELECT to automatically select an
input containing an audio signal if the SC15 is on;
W
AKE+SELECT to automatically wake up the SC15 from
standby, if necessary, and select an input containing
an audio signal; and O
FF (default) to disable automatic
switching.
VOLUME
Choose between VARIABLE (default) or FIXED to specify
whether the input should have variable or fixed gain.
FIX
ED is 0dB gain, equivalent to volume setting 66, and
will overrule MAXIMUM V
OLUME in AUDIO SETTINGS.
Selecting FIXED will show a loud-volume warning. Select
YES to proceed or NO to cancel the fixed gain setting.
Fixed gain functions as an SSP (Surround Sound Pass-
through) allowing the SC15 to be used as an amplifier in
a multi-channel system setup
INPUT GAIN
Choose between: -30dB to -1dB, 0dB (default), or +1dB to
+30dB to set the gain for the selected input.
If the gain is set too high on an input clipping may occur.
CONFIGURING THE SETTINGS
To Next Page
Loading...
