Why can't Prime Bolt 4GA GPS report messages to the backend server via mobile network?
There are a couple of reasons why your Prime GPS might fail to report messages: the APN might be incorrect, preventing direct internet access (in which case, ask your network operator for the correct APN), or the IP address/port of the backend server is wrong. Ensure the backend server's IP address is a recognized internet address.
What to do if Prime Bolt 4GA GPS can’t fix GPS successfully?
If your Prime Bolt 4GA GPS is having trouble establishing a GPS connection, it could be due to a weak signal. Try moving to a location with a clear view of the sky, positioning the device with the top surface (the side with the LED indicator) facing upwards.
Overview of the Bolt 4GA GPS locator, its LTE CATM1 capabilities, and tracking functions.
Visual description of the Bolt 4GA device, showcasing its physical attributes and layout.
Details on the function of the Bolt 4GA's buttons and USB port for operation and configuration.
Explanation of the Bolt 4GA's LED lights for power, charging status, and device operation.
List of components and accessories included with the Bolt 4GA device for initial setup.
Guidance on charging the Bolt 4GA battery, including usage notes for optimal battery life.
Step-by-step instructions for powering the Bolt 4GA device on and off using its interface.
Information on using the Bolt 4GA's WIFI function for MAC address scanning and reporting.
Details on the 433MHz function for positioning support and how to use specific commands.
Resolving typical problems with the Bolt 4GA, covering network, power, battery, and GPS issues.
Important safety guidelines for using the Bolt 4GA, including handling and environmental considerations.
To Next Page
General