PrimeWeld MIG180 - Page 19

SETUP
IMPORNT
Stainless steel wire is less flexible than other welding wire.
Therefore, it is more dicult to feed through the liner and
gun. It is especially important to keep the gun cable straight
while feeding stainless steel wire.
Turn the Power Switch o and do
not touch the Gun's Trigger and
before connecting Power Cord:
If using 11 0C, connect the
included adapter to the end of
the Power Cord. If using 220C,
do not use the adapter. Plug
the Power Cord into a properly
grounded and rated receptacle
that matches the plug and turn
the Power Switch ON.
Note:
The circuit must be equipped
with delayed action-type circuit breaker
or fuses.
Peld
OWNER'S MANUAL / lg