Primrose 3x10m User Manual

Instructions for all 3m width marquees
Thank you for purchasing a Primrose Marquee. We hope you will be very satisfied
with your purchase.
These instructions should tell you all you need to know in order to put the marquee
up. If you would like to see a video of Primrose staff erecting one of our marquees
please visit our website at www.marqueesandpartytents.co.uk
In addition if you have any questions or need any help please do not hesitate to call
us or email us.
Checking your purchase
Please check your marquee well in advance of your event. We have a high level of
quality control at our warehouse and all components are checked before they are
sent out. However, we do use third party couriers and it is possible that one box
may not be delivered to you – in this case we can replace it as long as we have
enough time to do so.
First check you have the correct number of boxes (see parts list).
If you haven’t received the correct number of boxes please contact us as soon as
possible.
Please open the boxes and check the contents.
www.marqueesandpartytents.co.uk
Customer Services
0118 945 9999

Primrose 3x10m Specifications

General

Brand	Primrose
Model	3x10m
Category	Outdoor Furnishing
Language	English

Summary

Introduction and Initial Checks

Checking your purchase

Check marquee components upon delivery for completeness and condition to ensure all parts are present and undamaged.

General Safety Warnings

Safety Precautions

Essential advice for erecting and using the marquee, covering frame integrity, weather, site, and fire hazards.

Marquee Assembly Guide

Step 1 – The roof frame

Details assembly of the roof frame, including end and central apexes using specific parts and connectors.

Step 2 – The roof canopy

Guides on unrolling and attaching the heavy roof fabric onto the frame, recommending assistance for longer marquees.

Step 3 – Attaching the legs

Covers fitting foot plates, attaching leg poles to one side of the frame, and securing the roof with bungees.

Step 4 – Inserting the ground bar kit (optional)

Details the installation of the optional ground bar kit, including pipe and plate placement for enhanced stability.

Step 5 – Attaching the walls and doors

Instructions on hanging side walls with windows and end walls with doors using bungees and hooks.

Step 6 – Fitting corner ropes (optional)

Explains fitting corner ropes for anchoring the marquee to the ground or using weights on hard surfaces.

Step 7 – Fitting storm straps (optional)

Guides on fitting storm straps to the long sides for increased stability in windy conditions.

Marquee Parts List

Parts Inventory and Quantities

Provides a comprehensive list of all parts required for different marquee sizes, including quantities and diagrams.