Princess auto Drift hero - Mount Engine to Frame; Install Chain to Drive Sprocket; Tighten Engine Mount Bolts

6\ PUT THE ENINGE ON TO THE FARME, USE
THE ENGINE MOUNT BOLTS (4-M8*30 BOLT)
TO KEEP THE ENGINE ON POSITION.
7\INSTALL THE CHIAN TO SECOND DRIVE
SPROCKET, MOVE THE ENGINE FORWARD
TO KEEP THE CHAIN TIGHTED.
8\TIGHTEN THE ENGINE MOUNT BOLTS
(4-M8*30 BOLT)
TROUQE 13-18 ft.lbs
CAUTION: ALL THE PARTS ARE PUT IN THE
PAG WITH THE LABEL “CLUTCH ASSEMBLY”.
Engine Mount Bolt
Engine Mount Bolt