3-1/2" Band Saw
3
For technical questions call: 1-800-665-8685
8354789 V 1.01
SPECIFICATIONS:
Motor
4A (400W)
Rated input
3,7A, 120 V, 60 Hz
No load speed
2,700 to 6,300 RPM
Blade size
52-9/16" x 1/2" x 0.025" x 10 TPI
Blade speed
115 to 262 FPM
Cutting depth capacity
4-7/8"
Noise Emission
84.51 dB
Cutting Capacity
Angle Round Square
Bench 90° Ø3-3/8" 4-15/16” x 3-3/8”
45° Ø3-3/8" 3-3/8” x 3-3/8”
Portable N/A Ø3-3/8" 7-1/2" x 3-3/8"
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit. Do not use in damp or wet
locations and do not expose this tool to rain. Water entering a power tool will increase the risk of electric
shock. Do not use in the presence of flammable gases or liquids.
2. Keep anyone not wearing appropriate safety equipment away from the work area. Distraction can cause you
to lose control.
3. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock
up tools and keep them out of reach of children.
To Next Page
Loading...