Instruction manual
8
1 Receiving signal
2 Cooling
3 Dehumidifying
4 Fan
5 Auto swing
6 Timing
7 Timer on/off
8 Sleep mode
9 Fan speed
10 Temperature display
• 2xAAA size batteries are required.
• Ensure batteries are inserted in the correct direction.
• When replacing, ensure both batteries are changed simultaneously.
• Press the corresponding buttons as explained in the control panel part
to operate the fan.
BEFORE THE FIRST USE
Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose and adjust the window position well.
• Insert the power cord into a grounded AC220~240V/50Hz socket.
• Press the power button to turn on the air-conditioner.
• Check whether the exhaust hose has been mounted properly.
• Set the temperature range: 16°C-31°C.
To Next Page
Loading...
