2 Prior Scientific
Table of Contents
SECTION 1 IMPORTANT SAFETY INFORMATION 4
1.1 Important Safety Information 4
1.2 Safety Precautions 6
1.3 Shipping/Storage Precautions 8
SECTION 2 GENERAL INFORMATION 9
2.1 Lumen 200/S/Pro Specification 9
2.2 Lumen 200 9
2.3 Lumen 200S 9
2.4 Lumen200Pro 9
2.5 Liquid Light Guide Information 10
SECTION 3 LUMEN200 11
3.1 Identifying your System 11
3.2 Installing your System 12
3.2.1 Installing the Bulb 12
3.2.2 Connecting to the Microscope 15
3.3 Starting up the Lumen200 16
3.4 Working with the Lumen200 16
3.5 Shutting Down the Lumen200 17
3.6 When to Change the Bulb 17
SECTION 4 LUMEN200S 18
4.1 Identifying your System 18
4.2 Installing your System 19
4.2.1 Installing the Bulb 19
4.2.2 Connecting to the Microscope 22
4.2.3 Connecting your Lumen200S to a PC 23
4.2.3.1 Install the USB-Com port for Lumen200S in Windows 7 23
4.2.3.2 Install the USB-COM port for Lument200S in WindowsXP 23
4.2.4 Connecting your Lumen200S to an OptiScan or ProScan System 27
4.3 Starting up the Lumen200S 28
4.4 Working with the Lumen200S 28
4.4.1 Using a Lumen200S as a standalone Light Source 29
4.4.2 Using a Lumen200S with a PC only 29
4.4.3 Using a Lumen200S with a PC and OptiScan/ProScan Controllers 29
4.4.4 Using a Lumen200S with TTL Inputs 29
4.5 Shutting Down the Lumen200S 30
To Next Page
