privileg CM1121-GS - Page 45

Use
Page EN-17
2. Place a size 2 paper filter in
the filter basket (13).
3. Fill the paper filter with
the desired quantity of ground
coffee.
The quantity of ground coffee
used must match the water fill
level.
4. Swing parts (12) to (14)
back in again.
6
4
2
(15)
(8) (11)
5. Check that the glass jug (9)
is sitting correctly on the hot-
plate (11). The glass jug lid (8)
must push the drip stop (15)
upwards. This opens the drip
stop in the filter insert so that
the brewed coffee can flow into
the glass jug.
OFF
ON
2
4
6
(7)
6. Insert the mains plug into
the socket.
The blue LED behind the
6
button on the control panel (7)
will light up.
7. Press the
but-
ton to select the ‘coffee from
ground coffee’ function.
The LED behind the button will
light up.
8. To start the brewing process,
press the
OFF
ON
button. After ap-
prox. 3 seconds, the coffee will
gradually flow into the glass
jug.
At the end of the brewing pro-
cess, you will hear 3 beeps.
9. If you
– want to keep the coffee warm,
leave the glass jug on the
hotplate.
The keep-warm function
lasts for 35 minutes, after
which the coffee machine will
switch off automatically.