EasyManua.ls Logo

Pro-4 Tactical Secure Touch Lock User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
14+
AGES
QR CODE
Pro-4
Secure Touch Lock
Starting
• Charging lock battery
Checking the ngerprint status
Registering administrator
ngerprint
• Registering user ngerprints
• Unlocking the cable
• Locking the cable
• Deleting ngerprints
• TSA lock access
• Maintenance
• Warning
• Troubleshooting
1 YEAR LIMITED PRODUCT WARRANTY ... VISIT WWW.PRO4TACTICAL.COM TO REGISTER YOUR PRODUCT
INSTRUCTIONS
Instruction Manual
Imported and Distributed by:
Pro-4 Marketing LLC
32411 Industrial Dr.,
Madison Heights, MI 48071
Tel: 248-809-2129
Toll Free: 1-833-776-3687
www.Pro-4Tactical.com
2.4” FINGERPRINT CABLE LOCK
Question and Answer IconNeed help?

Do you have a question about the Pro-4 Tactical Secure Touch Lock and is the answer not in the manual?

Pro-4 Tactical Secure Touch Lock Specifications

General IconGeneral
Lock TypeDeadbolt
Power SourceBattery
MaterialMetal
Authentication MethodFingerprint
Battery TypeAA Batteries
Battery Life12 months
Auto LockYes
Weather ResistanceYes
Weight2.2 lbs

Summary

Starting

Charging Lock Battery

Charging Indicator

Connect USB-C cable to charge; GREEN light indicates charging, turns OFF when complete.

Checking Fingerprint Status

Status Indicator Lights

Solid BLUE means no admin fingerprint; alternating BLUE/RED means admin fingerprint exists.

Registering Administrator Fingerprint

Administrator Registration Process

Register admin by pressing pad and placing finger 10 times; success is solid BLUE, failure is RED with 4 beeps.

Registering User Fingerprints

User Fingerprint Registration

Register user by placing admin fingerprint, then new user fingerprint 10 times; success is solid BLUE.

Unlocking the Cable

Unlocking Procedure

Place registered fingerprint; solid BLUE with 2 beeps means unlocked. RED with 4 beeps means failed.

Locking the Cable

Locking Procedure

Insert cable wire joint into locking hole to secure; lock enters standby mode upon success.

Deleting Fingerprints

Fingerprint Deletion Process

Reset lock by pressing pad until RED, then use admin fingerprint; success is RED with long beep.

TSA Lock Access

TSA Manual Mode

TSA employees can access manual mode for security inspections.

Maintenance

Cleaning and Charging

Clean with dry cloth, lubricate, and use provided USB-C cable for charging.

Warning

Safety Precautions

Do not use if smoking/overheated, avoid violent use, recharge if unused, avoid wet conditions, parental guidance for ages 14+.

Troubleshooting

Abnormal Operation

Reset by using a registered fingerprint then pressing setting button after red light turns off.