5
Positioning
Warning: before using the local air conditioning, keep it upright for at least two hours.
• The air conditioner must stand upright on an even surface.
• Do not position near a bath, sink or other permanently damp or wet areas.
• Place the air conditioner at least 50cm away from any other wall, curtains or heat
sources to ensure adequate air circulation.
• Ensure that the mains socket outlet remains accessible when the air conditioner is
in use.
• Ensure that there is free access to the air-inlet and air-outlet vents.
POSITIONING & INSTALLATION
Ventilation Installation
Note: The window kit is only designed for use with casement windows.
• Screw the exhaust hose onto the exhaust hose adapter, turning the hose anti-
clockwise.
• Screw the exhaust hose onto the exhaust connector on the rear of the air
conditioner, turning anti-clockwise (Fig.2).
• Adjust the length of the window guide to t the width of your window. The length of
the guide is adjustable. If it is too long it can be cut to size.
• Fit the exhaust hose adapter into the window guide.
• Close the window onto the window guide so that is securely held in place.
To Next Page
Loading...
