Pro-Elec PEL01201 - INSTALLATION ERRORS; CONTROL PANEL

6
INSTALLATION ERRORS
To operate efciently the air must be able to ow freely into the exhaust hose. To assist
this:
• Avoid any sharp bends or kinks in the exhaust hose.
• Keep it as level as possible.
• Keep its length as short as possible. The maximum extension length of the
exhaust pipe is 1.5m. Do not try to lengthen it.
CONTROL PANEL
• POWER: Press to turn the air conditioner on or off. When it turns on, it will do so in
the default mode of cooling with low fan speed.
• MODE: press this key to select cooling, dehumidifying and fan mode.
• FAN: press this key to select the fan speed (high or low).
• DOWN: in cooling mode, press this key to reduce the temperature. Temperature
range is 16°C to 31°C.
• UP: in cooling mode, press this key to increase the temperature. Temperature
range is 16°C to 31°C.
• SLEEP: in the cooling mode, press this key to turn on/off the sleep mode function.
• TIMER: in the power-on or standby mode, press this key to setup on/off delay
timer from 1 to 24 hours.
• SWING: Press once and the louvre will swing continuously left and right. Press the
button again and the louvre will stop moving.