5/45
CHAPTER 3 REPLACEMENT PROCEDURE 14
3.1 WORK FLOW 14
3.2 PREPARATION 15
3.3 RECEIVE SCREEN DATA FROM GP-37W2 16
3.4 CONVERT SCREEN DATA WITH THE PROJECT CONVERTER 20
3.5 TRANSFER THE SCREEN DATA TO GP-4301TW 27
3.6 DIFFERENCES OF SOFTWARE 32
3.6.1 DIFFERENCES AFTER CONVERSION 32
CHAPTER 4 COMMUNICATION WITH DEVICE/PLC 34
4.1 DRIVERS 34
4.2 SHAPES OF COM PORTS 34
4.3 SIGNALS OF COM PORTS 35
4.3.1 SIGNALS OF COM1 35
4.3.2 SIGNALS OF COM2 37
4.4 MULTILINK CONNECTION 38
4.5 INTERNAL 2-PORT FEATURE FOR MITSUBISHI PLC 38
4.6 CABLE DIAGRAM AT THE TIME OF REPLACEMENT 39
4.6.1 WHEN USING A RS-232C CONNECTION CABLE 40
4.6.2 WHEN USING A RS-422 CONNECTION CABLE 42
To Next Page
Loading...
Need help?
General
