Pro-face GP3000 Series Installation Guide

1
GP3000 Series
CANopen Interface
Installation Guide
Package Contents
(1) Installation Guide (1) <This Guide>
This unit has been carefully packed, with
special attention to quality. However, should
you find anything damaged or missing, please
contact your local GP distributor immediately.
About the Manual
For the detailed information on GP3000
series, refer to the following manual.
• GP3000 Series Hardware Manual
• Maintenance/Troubleshooting Guide
The manuals can be selected from the help
menu of GP-Pro EX or downloaded from
Pro-face Home Page.
URL
http://www.pro-face.com/
Caution
Be sure to read the “Warning/Caution
Information” on the attached sheet before
using the product.
CAUTION
This manual describes the part names and
general specifications related to the
CANopen I/F included with the CANopen
board type unit of the GP3000 series, as
well as the wiring to the CANopen
connector. Before using the CANopen
connector, be sure to read this Installation
Guide in conjunction with the attached
GP3000 Series’ Installation Guide.

Pro-face GP3000 Series Specifications

General

Touch Panel Type	Analog Resistive
Power Supply	24V DC
Display Type	TFT LCD (depending on model)
Communication Ports	RS-232, RS-422/485, Ethernet
Operating Temperature	0°C to 50°C
Backlight	LED
Protection Rating	IP65 (front panel)
Storage Temperature	-20°C to 60°C
Display Size	5.7 to 12.1 inches (depending on model)
Resolution	320x240, 640x480, 800x600