Pro-face PFXGP4402WADW - Page 16

GP-4402WW/GP-4502WW Panels
16
Handling the LCD Panel
The following characteristics are specific to the LCD panel and are considered normal behavior:
 LCD screen may show unevenness in the brightness of certain images or may appear different
when seen from outside the specified viewing angle. Extended shadows, or crosstalk may also
appear on the edges of screen images.
 LCD screen pixels may contain black and white-colored spots and the color display may look as
if it is changing.
 When the same image is displayed on the panel screen for a long period, an after-image may
appear after changing the image. If this happens, turn OFF the panel, wait 1 second, and then
restart the panel.
 The panel brightness may decrease when used for a long time in an environment continuously
filled with inert gas. To prevent deterioration of panel brightness, regularly ventilate the panel.
For more information, please contact your local distributor.
http://www.pro-face.com/trans/en/manual/1015.html
NOTE: Change the screen image periodically and try not to display the same image for a long
period time.
If the panel is damaged and any liquid comes in contact with your skin, immediately rinse the area
with running water for at least 15 minutes. If the liquid gets in your eyes, immediately rinse your
eyes with running water for at least 15 minutes and consult a doctor.
CAUTION
SERIOUS EYE AND SKIN INJURY
The liquid in the LCD panel contains an irritant:
 Avoid direct skin contact with the liquid.
 Wear gloves when you handle a broken or leaking unit.
 Do not use sharp objects or tools in the vicinity of the LCD touch panel.
 Handle the LCD panel carefully to prevent puncture, bursting, or cracking of the panel material.
Failure to follow these instructions can result in injury or equipment damage.