13
HOW TO USE THE TRAINER
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the trainer has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter. If
you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the recep-
tacle on the frame
of the trainer. Insert
the appropriate plug
adapter into the power
adapter if necessary.
Then, plug the power
adapter into an appro-
priate outlet that is
properly installed in
accordance with all local codes and ordinances.
HOW TO MOVE THE TRAINER
Due to the size and weight of the trainer, moving
it requires two persons. Stand in front of the trainer,
hold the console bracket, and place one foot against
one of the wheels. Have a second person help you pull
on the console bracket until the trainer will roll on the
wheels. Carefully move the trainer to the desired loca-
tion, and then lower it to the floor.
Console
Bracket
Place
your foot
here
To Next Page
Loading...
Need help?
General
