What to do if my Pro-Form Stepper Machine console does not display correct feedback?
If the console on your Pro-Form Stepper Machine isn't displaying correct feedback, try these steps: * First, adjust the reed switch. * If that doesn't work, plug in the power adapter and turn the Large Pulley for a moment. Repeat this process, if needed, until the console shows the correct feedback.
Why are the pedals slipping on my Pro-Form CARDIO HIT?
If the pedals on your Pro-Form Stepper Machine are slipping while you pedal, try the following: 1. Tighten the lower Adjustment Screw four turns. This will tighten the Large Drive Belt. 2. Next, tighten the upper Adjustment Screw two turns. This will tighten the Small Drive Belt. 3. Finally, tighten the lower Adjustment Screw four turns again. This will further tighten the Large Drive Belt.
How to fix a Pro-Form CARDIO HIT Stepper Machine console that won't turn on?
If the console of your Pro-Form Stepper Machine doesn’t turn on, ensure that the power adapter is fully plugged in. If it still doesn't turn on, turn the Large Pulley until a Pulley Magnet is aligned with the Reed Switch.
Lists necessary tools and steps for preparing the assembly area.
Solutions for common problems encountered with the console display or function.
How to use heart rate to determine optimal intensity for fat burning and aerobic fitness.
General| Brand | Pro-Form |
|---|---|
| Model | CARDIO HIT |
| Category | Stepper Machine |
| Language | English |
To Next Page