Pro-Ject Audio Systems Stream Box S2 - Basic System Settings; Speaker Name and Sleep Timer; Integrated Hotspot Configuration; Factory Reset

© Pro-Ject Audio Systems · Pro-Ject Stream Box S2 · Revision 2018.11.29
9
Basic System Settings
The Basic System Settings can be accessed via the symbol on the Right-Side Page.
Integrated Hotspot
Factory Reset
Rename allows you to change the name of your Stream Box S2.
Sleep Timer allows you to define a period of time after which the Stream
Box S2 automatically enters stand-by mode.
An important setting is the hotspot status. After connecting your Stream Box S2 to
a WiFi network for the first time, the integrated hotspot is automatically hidden. If
you want to connect to this hotspot again you have to turn off “Need Hide SSID”,
like in the screenshot to the left and set a password. After connecting to the
hotspot, you can access the Stream Box S2 by entering http://10.10.10.254 into
the address bar of a web browser, to for example connect to a new home WiFi.
Allows you to reset the Stream Box S2 to factory settings.