pro.point 180 MULTI-PROCESS MIG-ARC-TIG WELDER - SPECIFICATIONS; SAFETY; HAZARD DEFINITIONS

8611311 180 MULTI-PROCESS MIG-ARC-TIG WELDER V1.0
2 For technical questions call 1-800-665-8685
Specifications
SPECIFICATIONS
Input Voltage
115/230V AC ± 15
Input Current Rating
115V
16 to 27.5A
230V
22.6 to 30.2A
Phase
Single
Output Current Range
10 to 180A
MIG (GMAW/FCAW) Welding Output @ 25% duty cycle
115V
30 to 100A
230V
30 to 180A
MIG Welding Voltage Range
15-1/2 to 21-1/2A
STICK (SMAW) Welding Output @ 25% duty cycle
115V
10 to 100A
230V
10 to 160A
TIG (GTAW) Welding Output @ 25% duty cycle
115V
10 to 100A
230V
10 to 180A
No-Load Voltage
53V
Welding Capacity
3/8 in.
Wire Feed Speed
30 to 60 in. per minute.
Welding Wire Diameter (MIG-ARC-TIG)
0.025/0.03/0.035 in.
Protection Class
IP21S
INTRODUCTION
The Pro.Point 180 Multi-Process MIG-ARC-TIG Welder incorporates the latest in IGBT
technology for maximum efficiency and longer duty cycles. The welding machine will provide
180 amps of MIG, ARC and TIG output with dual voltage (115/230V). Select the wire gauge and
ARC/MIG/TIG with the patented Smartset operation. The unit does the rest. For MIG/MAG
welding, the user can choose gas or gasless options. The welding unit has a Tweco euro style
TIG Torch connection for an optional MIG torch (sold separately). Inside are wire feeders with
steel guide rollers for use with welding wire.
The Pro.Point 200A Spool Gun Kit (SKU 8612517) is compatible with this welding machine.
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance
instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that
there is a possibility of property damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will result in severe
personal injury or death if the proper precautions are not taken.
180 MULTI-PROCESS
MIG-ARC-TIG WELDER