To Next PageTo Next Page
Need help?Do you have a question about the pro.point 8619470 and is the answer not in the manual?
General| Brand | pro.point |
|---|---|
| Model | 8619470 |
| Category | Welding System |
| Language | English |
General safety guidelines for operating the welding machine.
Risks associated with electric shock during welding operations.
Dangers from welding fumes and gases to health.
Risks of arc rays to eyes and skin.
Preventing fires from welding sparks and hot materials.
Safe handling and storage of pressurized gas cylinders.
Guidelines for environment and safety advice.
Identification of controls and connectors on the front panel.
Connecting electrode and earth leads for ARC welding.
Adjusting current based on electrode type and size.
Explanation of manual metal arc (stick) welding.
Guidance on choosing the correct electrode.
Recommended current ranges and arc length techniques.
Connecting MIG torch and earth lead.
Selecting MIG function and Smartset.
Adjusting drive roller pressure and alignment.
Types of grooves for different wire materials.
Chart for selecting rollers based on wire type and diameter.
Mounting spool and feeding wire into the unit.
Adjusting tension for optimal wire feed.
Connecting MIG torch and earth lead for gasless welding.
Setting machine function and torch operation.
Fitting the correct knurled drive roller.
Connecting spool gun to machine and control cable.
Connecting earth lead and weld power lead.
Detailed explanation of the short circuit transfer process.
Connecting TIG torch, earth, and power leads.
Step-by-step guide for starting the lift arc.
Common problems and solutions for MMA/Stick welding.
Reasons and remedies for excessive spatter in MIG welding.
Causes and solutions for porosity in MIG welds.
Troubleshooting no wire feed or inconsistent feed.
Reasons and remedies for rapid tungsten burn-off.
