pro.point 30A PRO CUT 30 - Plasma Cutter Specifications; Energy Input Requirements

8784639 30A PRO CUT 30 PLASMA CUTTER V1.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Voltage Rating
115/230V AC
Amperage Rating 20/30A
Frequency Rating
60Hz
Phase Single
Input Rating 5.5-230V KVA
Power Rating 3.9 to 4.6 KVA (115/230V)
Cutting Capacity
Clean Cut: 1/4 in., Sever Cut: 1/2 in.
Cutting Speed Mild Steel: 18 in. per minute
Air Consumption
6 CFM at 75 PSI
Pressure Rating 65 to 75 PSI
Connection Type Direct connection
Cord Length 12 ft
Dimensions
17-3/4 x 12 x 6-1/2 in.
Working Temperature -14 to 104°F (-25 to 40°C)
Cooling System
Forced Air
Insulation Class B
Enclosure Class IP21S
ENERGY INPUT
U1 I 1max I 1eff Definitions
115V 40A 24A
U1 = Primary Voltage
I 1max = Rated maximum supply current.
I 1eff = Maximum effective supply current.
230V 20A 12A
30A PRO CUT 30
PLASMA CUTTER