EasyManua.ls Logo

pro.point 8553521 - User Manual

pro.point 8553521
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V1.0 8553521
Please read and understand all instructions before use. Retain this
manual for future reference.
USER MANUAL
6,000W SHOP HEATER

Table of Contents

Questions and Answers

  • J
    John BassAug 10, 2025
    Why is my pro.point 8553521 not heating?
    • M
      Mr. William Gill DDSAug 11, 2025
      If your pro.point Heater isn't heating, it might be due to several reasons: 1. The overheat protection may have temporarily turned off the heater. To fix this, turn the heater OFF, switch off the circuit breaker, and wait 10 minutes before turning it back on. 2. The room might have reached the set thermostat temperature. To increase the temperature, adjust the thermostat control knob to a higher setting. 3. A breaker or fuse might have tripped. Check your electrical box to ensure the breaker hasn't been blown, especially if the receptacle is shared with other high-consumption appliances.
  • D
    Dennis HuertaAug 25, 2025
    What to do if my pro.point 8553521 Heater is producing a burning smell?
    • N
      Nathan OconnorAug 25, 2025
      If your pro.point Heater is producing a burning smell, here's what you should do: * First, make sure there are no combustible materials within 0.9 meters (3 feet) of the heater. Remove any such items. * Second, the smell could be from a drop of oil on the heating coil during manufacturing. Ensure the room is well-ventilated, as this should evaporate quickly and not reoccur. * Third, ensure there is enough space around the heater. Reposition it, if needed, to provide adequate clearance from adjacent walls.

pro.point 8553521 Specifications

General IconGeneral
Power1500W
Voltage120V
Heating AreaUp to 150 sq ft
ThermostatAdjustable
Safety FeaturesOverheat protection, tip-over switch