pro.point 8553521 - Troubleshooting

V1.0 6,000W SHOP HEATER 8553521
Visit www.princessauto.com for more information 11
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
PROBLEM(S)
POSSIBLE CAUSE(S)
SUGGESTED SOLUTION(S)
Unit is not
heating.
1. Overheat protection
has temporarily
deactivated the heater.
2. Room temperature has
been warmed up to
thermostat setting.
3. Breaker/Fuse has been
tripped.
1. Turn the heater OFF;
Switch off the circuit
breaker. Wait 10 minutes
before turning on the
heater.
2. To increase the room
temperature, adjust
thermostat control knob
to a higher setting.
3. Check your electrical
box to confirm the
breaker has not been
blown. This may occur if
the receptacle is shared
between other high
consumption appliances.
The heater
is producing
a burning
smell.
1. Check & ensure there
are no combustible
materials within
0.9 meters (3 feet)
surrounding the heater.
2. A drop of oil fell on the
heating coil during the
manufacturing process.
It will quickly evaporate
and should not occur
again.
3. Ensure a minimum
clearance around the
heater.
1. Remove any
combustible items from
the heater.
2. Ensure room in which
heater is situated is well
ventilated.
3. Reposition the heater so
there is enough space
around the heater to the
adjacent walls. See
Heater Installation.