pro.point Pistol-Grip Grease Gun

Questions and Answers

P
pcainJul 29, 2025
How to fix pro.point Pistol-Grip Grease Gun gun that pumps little or no grease?
- K
  Kevin WalkerJul 29, 2025
  If your pro.point Tools gun pumps little or no grease, it could be due to several reasons. First, check for trapped air pockets in the grease and prime the grease gun to remove them. Another cause may be thick or frozen grease. To resolve this, use a lower viscosity grease, add some oil to the grease, or heat the gun barrel to unfreeze the grease. Also, a blocked grease gun extension or head can cause this issue. Remove the extension to see if the gun dispenses grease. If it does, clean or replace the extension. If not, disassemble the grease gun head to check for blockages, clean, and then reassemble it.
J
James EvansAug 5, 2025
What to do if grease leaks from pro.point Pistol-Grip Grease Gun coupler?
- H
  hensonmeganAug 5, 2025
  If grease leaks from the coupler body joint or between the coupler jaws and grease nipple of your pro.point Tools, it's likely due to a damaged grease coupler. The suggested solution is to change the coupler.
D
debrawilkinsAug 13, 2025
Why is grease leaking from the back of my pro.point Pistol-Grip Grease Gun Tools grease gun?
- C
  Cindy WilsonAug 13, 2025
  If you notice excessive grease leaking from the back of your pro.point Tools gun around the plunger rod, this is likely caused by a damaged grease gun rubber follower. The solution is to replace the follower.
J
Jerry WilsonAug 20, 2025
How to stop grease leaking from pro.point Pistol-Grip Grease Gun extension connection?
- J
  Joel RiceAug 20, 2025
  If grease leaks from the connection between the Grease Gun Head and the Extension or between the Extension and Coupler of your pro.point Tools, the cause is a loose connection. To fix it, tighten the connection using a thread sealant.