pro.point PN105I - Specifications; Hazard Definitions

8958696 GASLESS MIG WELDER PN105I V1.0
2 For technical questions call 1-800-665-8685
Specifications
SPECIFICATIONS
Input Voltage
115VAC ±15%
Output Current Range
40 to 105A
Max. Amperage Draw
26.5A
MIG Welding Output @ 20% duty cycle
105A
AC/DC Output
DC
No-Load Voltage
46V
Welding Capacity
3/16 in. Mild Steel and Stainless Steel
Wire Feed Speed
Automatic
Welding Wire Diameter
0.023 / 0.030 / 0.035 in.
Welding wire Type
FCAW: AWS E71T-GS and GMAW: AWS ER70S-6
Welding Gas
Argon, Argon & CO2 mix, or CO2 (requires adapter)
Insulation Class
B
Power Factor
0.74
Dimensions (L x W x H)
14 x 5.2 x 9.85 in.
Generator Compatible
No
Weight
13 lb
INTRODUCTION
The Gasless MiG Welder PN105I incorporates the latest in IGBT technology for maximum efficiency
and longer duty cycles. The welding unit has both a gas and gasless option. The wire feed speed is
automatically calibrated based on the wire size and Synergic control knob settings.
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance
instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that
there is a possibility of property damage, injury or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will result in severe
personal injury or death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in
severe personal injury or death if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in minor or
moderate injury if proper practices are not taken.
GASLESS MIG WELDER
PN105I