PRO-PULSE JF72553B - Push Stick Construction

49
PUSH STICK CONSTRUCTION
 Use good quality plywood or solid wood
 Use 1/2’’ or 3/4’’ (12 or 20 mm) thick material
 Push stick MUST be thinner than the
width of material being cut
15-3/4’’ (400mm)
20° - 30°
90°
Cut Here To Push 3/4’’ (20 mm) Wood
Cut Here To Push 1/2’’ (12 mm) Wood
Notch To Prevent
Hand From Slipping
Drill Hole For
Hanging
OPERATION
ENGLISH