What to do if my Pro's Kit Multimeter does not work?
If your Pro's Kit Multimeter isn't working, the batteries might be exhausted, or the fuse might be broken. First, check the state of the batteries. Also, inspect the 0.5A fuse.
Why are no measurements possible via V/mA socket on my Pro's Kit MT-2019?
If you can't get any measurements through the V/mA socket on your Pro's Kit Multimeter, the fuse might be defective. Check the 0.5A fuse and replace it if necessary.
Why is my Pro's Kit MT-2019 Multimeter displaying faulty measuring results?
If your Pro's Kit Multimeter is showing faulty measurements, consider these potential causes: * Check if null balancing of the display or a 0 calibration for resistance measurement has been performed. * Verify that the batteries are properly assembled.
How to fix no change in measured values on Pro's Kit MT-2019?
If the measured values on your Pro's Kit Multimeter aren't changing, ensure that you've selected the correct measuring sockets and that the measuring range/mode (AC/DC) is appropriate for what you're testing.
General| DC Current | 200μA/2mA/20mA/200mA/10A |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| Transistor Test | Yes |
| Continuity Buzzer | Yes |
| Display | 3 1/2 digit LCD |
| AC Voltage | 200V/750V |
| Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ |
| Battery | 9V |
Specifies safety standards like IEC61010-1, CAT II 1000V, CAT III 500V.
Instructions for safely measuring DC and AC Voltage, with warnings for high voltage.
Instructions for measuring DC Current, warning against measuring AC current.
Steps for zeroing, connecting leads, and taking resistance readings.
Guidance on selecting appropriate resistance ranges for accuracy.
To Next Page
