Pro's Kit MT-3209 - Specifications; 3.1 Overview

3
DC AC
DC, AC voltage or Ampere
Connected / Disconnect indication
Low battery
Automatic shutdown indication
Automatic range measurement mode
Data hold status
Hz, KHz
Hertz, Kilohertz
%
Duty cycle
Diode test
Ω, kΩ, MΩ
Ohm, Kilohm, Megohm (resistance)
V
Volt (voltage),
A
Ampere (current)
mF, μF, nF
Farad, the unit of capacitance.
℃/℉
Temperature ℃ or ℉
NCV
Non-contact voltage detection
LoZ
Low impedance voltage measurement
VFC
Variable-frequency drive voltage or current
measurement
3. Specifications
The meter should specify one year as a cycle to re-calibrate in the conditions of 18℃ ～
28℃ and relative humidity less than 75%.
 3.1 Overview
 Automatically select measurement function and range.
 Overload protection for the whole measurement range.
 Maximum allowable voltage between the measuring terminal and the
Earth: 600V DC or 600V AC
 Work height: maximum 2000m
 Display: LCD
 Maximum display value: 6000 digits.
 Max open jaw: 30mm.
 Polar indication: Automatically indicates ‘-’ means negative polarity.
 Over range indication: ‘0.L’ or ‘-0.L’.