EasyManua.ls Logo

PRO.SIS.TEL. PST - User Manual

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PRO. SIS. TEL.
Produzione sistemi telecomunicazioni
Antenna Rotator
Azimuth “D” DC version
User’s manual
Rev.1.7b-usb
FCC
C.da Conghia 298 - 70043 Monopoli BA Italy
Tel-Fax ++39 080 8876607
E-mail:prosistel@prosistel.it
Copyright ® PRO.SIS.TEL. 2017
Question and Answer IconNeed help?

Do you have a question about the PRO.SIS.TEL. PST and is the answer not in the manual?

Summary

Warranty

Important Information

Precautions

Section 1 The Controller D Version

1-1 Front Panels Description

Detailed description of the controller's front panel components and their functions.

1-2 Rear Panel Description

Details the connectors and ports on the rear panel of the controller, including USB and power.

1-3 Controller Features

Covers features like Absolute mode, dip-switch settings, soft start/stop, calibration, offset, and advanced operational settings.

1-4 The Rotator

Details the rotator's unique design, motor location, shaft connections, and cable ends.

Section 2 Installation and Connections

2.1 Unpacking

Instructions for unpacking the rotator and checking for any shipping damage.

2.2 Power Supply Connection

Guide on how to connect the power supply to the controller unit.

2.3 Rotator Control Cable Preparation & Connection

Detailed steps for preparing and connecting the rotator control cable, including wiring.

2.4 Rotator Cable Inspection

Methods for inspecting the rotator cable wiring using a multimeter and truth table.

2.5 Pre-installation Check

Procedures for performing initial checks before the final installation of the rotator.

2.6 Troubleshooting

Power Issues

Troubleshooting steps for common power-related problems with the unit.

Motor Direction Errors

How to resolve issues where the motor turns in the incorrect direction.

Display vs. Command Mismatch

Troubleshooting when the unit's display shows incorrect information compared to commands.

Specific Display Errors

Guidance for diagnosing specific display readings like 110. or 250. and related behavior.

2.7 Rotator Installation

Antenna Direction Adjustment

Steps for mechanically aligning the antenna direction after mast installation.

Rotator Maintenance

Instructions for maintaining the rotator, including lubrication and corrosion protection.

Section 3 Principles of Operation

3.1 Rotator Mechanism

Explanation of the worm-wheel geared motor and its high reduction ratio operation.

3.2 Electrical Circuit Overview

Description of the electrical circuit diagram, including indicator circuits, motor power switching, and connections.

Section 4 Specifications

4.1 Worm Gear Box Specifications

Technical specifications related to the worm gear box, including its case and standard compliance.

4.2 Motor Specifications

Technical specifications related to the motor, including its case and standard compliance.

4.3 Control Unit Specifications

Technical specifications for the microprocessor-controlled unit, including connectivity.

Section 5 CD Content

Software Installation

Instructions for installing the PRO.SIS.TEL. software from the provided CD.

Driver Installation

Guidance on installing necessary drivers for the PC USB port connection.

Additional Documentation

Information on accessing manuals and service documents from the CD folder.

Appendix 1 Declaration of Conformity

Declaration of Conformity

Official declaration that the product conforms to relevant EU directives and harmonized standards.

Appendix 2 Warning

Protect Your Equipment

Safety advice to protect electronic equipment from damage due to lightning and static.

PRO.SIS.TEL. PST Specifications

General IconGeneral
BrandPRO.SIS.TEL.
ModelPST
CategoryAntenna
LanguageEnglish

Related product manuals