ADVANCED FEATURES
• MT-7071 Transmitter: comes with 128×64 dots graphic LCD, 50×27.5mm
dimension with LED backlight allows work even in dark places. User can
select display language in Chinese or English.
• MT-7071 Transmitter：measures the cable length or locates the break point
of RJ45 Lan cable、RJ11/12 phone cable、Coaxial cable up to 1200M
(4000ft). The minimum testing length is 2meter (6.8 feet/2.2 yard). User can
select unit of length in meters, feet or yards, accuracy is ±3.0% after length
calibrating. It can save 7 calibration parameters and recall the data to apply it
at anytime.
• MT-7071 Transmitter: Generates 580/1160 Hz audio signal with two tones.
The maximum distance of Transmitter is ≧ 3 kilometers. Work with MT-7071
Receiver by volume adjustment feature can precisely find the break point in
the range of 10~30cm. The MT-7071 Receiver with the indicated LEDs is
more accurate for testing.
• MT-7071 Transmitter with the Remote unit: for cable mapping by LCD
indication. The instrument can verify cable status for continuity, shorts,
opens and crossover on RJ45 Lan cable and RJ11/12 telephone cable and
test shielding/ unshielded wire. The maximum length that can be tested is
610 meters (2,000 feet/666 yards).
• MT-7071 Transmitter with multi remote units：It supports testing with multi
remote units up to 8 (optional MT-7071U: ID#1~#8) for cable mapping and
verifying continuity, shorts, opens and crossover of RJ45Lan cable or
RJ11/12 phone cable, Coaxial cable. The maximum length could be tested is
610 meters (2,000 feet/666 yards). LCD can display each ID number to
quickly locate and trace the cable that you want to test.
• MT-7071 Transmitter ：With alligator clips patch cord for verifying the open
and short status for single conductor or twin conductor cable and testing the
shielded or unshielded wire.
• MT-7071 Transmitter ：Circuit Protection design for low current < 5mA, 48V
DC, allows to test telecommunication equipments and routers in live network,
you don’t need to turn off power.
• MT-7071 Transmitter ：User can select 15, 30, 60 or 120 minutes setting
the auto power off time and select the low battery indication function.
• MT-7071 Receiver：With Non Contact Voltage detection function which can
detect AC voltage from 90~1000V to avoid danger and damage by detecting
the voltage in advance.
• MT-7071 Receiver：With LED lighting and earphone jack allowing to test in
noisy or dark environments.
To Next Page
Loading...
