_ Do not strike the hand piece against hard surfaces or otherwise subject it to
physical shock.
_ Be sure the unit is grounded. Always connect power to a grounded receptacle.
_ Do not disassemble the pump.
_ Do not modify the unit.
_ Use only genuine Pro’sKit replacement parts.
_ Do not wet the unit or use the unit with wet hands.
_ Remove power cord by holding the plug – not the wires.
_ Make sure the work area is well ventilated.
_The Pro’sKit SS-989 is not intended for use by children or infirm persons
without supervision.
_ Children should be supervised to ensure that they do not play with the SS-989.
I. Packing list and name of parts
Name of Parts
Packing List
1. 1.SS-989 2 in 1 SMD Hot Air Rework Station
2. User’s manual
3. Soldering iron
4. Soldering iron Stand
5. Heat Gun holder
6. Air nozzle x 3
SMD rework temperature display
Soldering temperature
display
Soldering iron temperature
regulation knob
SMD rework temperature
regulation knob
SMD rework temperature calibration
Soldering temperature calibration
To Next Page
Loading...