Programming
Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time
period, RETURN time period, and for the Saturday SLEEP time period.
Saturday:
Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time
period, RETURN time period, and for the Sunday SLEEP time period.
Sunday:
10
11
Set Program Schedule 5+1+1 or 7 Day (continued)
Temporary Hold: The thermostat will display HOLD and RUN SCHED on
the left of your screen when you press the or
key. If you do nothing, the temperature will remain at this setpoint
temporarily for 4 hours. After this, the program setpoint will then replace
your temporary setpoint.
Permanent Hold: With a temporary hold set, if you press the HOLD key at
the left of your screen, you will see HOLD appear below the setpoint tem-
perature in the display. The thermostat will now
permanently stay at this setpoint and can be adjusted using the
or keys.
To Return To Program: Press the RUN SCHED key at the bottom of your
screen to exit temporary and permanent holds.
Temporary & Permanent Hold Feature (If using Programming)
Features
If using 7-Day Programming:
Use these same steps for every individual day.
To Next Page
Loading...
