Proaction VC9340S-6 User Manual

13 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Instruction Manual - Please keep for future reference

Proaction Pets Upright Vacuum Cleaner

VC9340S-6

5-06

Table of Contents

Questions and Answers:

D
dylan80Jul 31, 2025
Why is the suction performance reduced on my Proaction VC9340S-6 Vacuum Cleaner?
- D
  Dennis FinleyJul 31, 2025
  Reduced suction performance in your Proaction Vacuum Cleaner can stem from several causes: - A full or clogged dust cup: Clean the dust cup. - Incorrect pile height setting: Adjust the setting. - A clogged nozzle or dust inlet port: Remove any obstructions. - A clogged hose: Clear the blockage. - A broken belt: Replace the belt. - Hose not fully inserted: Push the hose in securely. - Dirty filters: Clean or change the filters. - Rubbish blocking the "U" tube: Open the cover on the "U" tube and remove the blockage. - The U Tube Cover is open: Turn off the machine and close the U Tube cover.
C
Christopher AtkinsonAug 15, 2025
What to do if my Proaction VC9340S-6 machine does not work?
- J
  Jennifer BeardAug 15, 2025
  If your Proaction Vacuum Cleaner isn't working, consider these potential causes: - It might not be properly plugged into the mains wall socket: Plug it in firmly. - There could be no electricity in the mains wall socket: Check the fuse or breaker. - The On/Off switch might not be turned on: Push the On/Off switch to the on position. - The motor thermostat may have activated: Wait 45 minutes for the motor thermostat to reset.

Proaction VC9340S-6 Specifications

Power

voltage	230VAC-50Hz
power consumption nominal	1600W
power consumption maximum	1800W

Summary

Important Safety Instructions

Location Safety Precautions

Guidelines for storing and using the appliance, avoiding hazardous locations like hot ovens or damp environments.

Mains Lead and Electrical Safety

Instructions for handling the mains lead, electrical requirements, and plug safety.

Child Safety and General Precautions

Safety advice regarding children and general operational precautions for safe use.

Static Charge and Wet Handling

Know Your Machine

Assembly Procedures

Operating Instructions

Filter Maintenance

Instructions for cleaning and maintaining the HEPA dust tank filter and other filters.

Dust Tank and Motor Thermostat

Drive Belt and U Tube Maintenance

Assembly

Operation

Carpet Height Adjustment

Cleaning the Filters

Removing and Emptying Dust Tank

Procedure for safely removing and emptying the dust tank.

Cleaning the HEPA Dust Tank Filter

Detailed steps for cleaning the washable HEPA filter and its frame.

Pre-Motor and Exhaust Filter Care

Instructions for cleaning the pre-motor filter and the exhaust filter.

Motor Thermostat

Replacing the Drive Belt

Drive Belt Cleaning and Replacement

Trouble Shooting

Related product manuals

Proaction CJ021