PROAIM BMP-40R User Manual (English)

To Next Page

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Blimp Mic Windshield (BMP-40R)

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Assembly Manua l

40cm Blimp Windshield with Microphone

Suspension and Handle

Mic Holders

Bonus 6 pc. Boom

Pole Adapter Set

Accessories

40cm Synthec Fur Cover

Need help?

Do you have a question about the PROAIM BMP-40R and is the answer not in the manual?

PROAIM BMP-40R Specifications

General

Steps to open the blimp cage, remove its cap, and extract the mic holder rod for setup.

Instructions for inserting the microphone into the suspension system and reattaching the blimp cage.

Guidance on adjusting internal wiring and properly closing the blimp cage components.

Connecting XLR audio cables and securing the assembly to a boom pole using a 3/8"-16 screw.

Detailed steps for adjusting boom pole height using adapter sets and securing them properly.

Instructions on using the synthetic fur cover to further reduce wind noise during operation.

Information regarding the one-year product warranty, including coverage and exclusions.

Statement outlining the company's non-liability for damages from mishandling or unauthorized service.

Guidance on how to contact the company for product dissatisfaction or immediate support.