English | 13 of 98
Notes:
• If the shallow tray is not large enough to hold all of the water from the appliance, replace
the water tank plug and water tank plug clip to prevent water owing onto the oor. Empty
the shallow tray and continue from step 2.
• If the water tank level is above the min line and no time is available to run the appliance
so that the water level reaches the min line prior to emptying the water tank, it is
recommended to partially empty the water tank using a small jug until the water level
reaches the min line. To gain easy access to the water tank so that a small jug may be
used, remove the lter casing from the rear of the appliance. Alternatively, if you have
access to a drainage point the water tank can be emptied directly over the drainage point.
CLEANING AND STORAGE
――
WARNING: ENSURE THE APPLIANCE IS SWITCHED OFF
AND UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE
HANDLING, FILLING WITH WATER OR CLEANING THE
APPLIANCE.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
• Cleaning and user maintenance shall not be made by
children.
• Clean the vents and openings of the appliance regularly
with a vacuum cleaner, using the brush attachment to
avoid any dust build-up.
• Empty and clean the appliance before storage. Clean the
appliance before next use.
• Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
• The lter should be cleaned every two weeks using a
damp cloth.
To Next Page
Loading...
Need help?
General
