Operating Instructions
1. Getting Started 3
2. Safety and Liability 4
2.1 General Information 4
2.2 Liability 4
2.3 Safety Instructions 4
2.4 Correct Usage 4
3. Real Tests 5
3.1 Preparation 6
3.2 Define a Roll ID for the Test Series 6
3.3 Measure the Roll Hardness Profile 7
3.4 Terminate the Series and review 7
3.5 Entering a Roll ID manually 8
3.6 Accept or modify limits 8
3.7 Review list 9
4. Technical Specifications 9
5 Part Numbers and Accessories 10
5.1 Units 10
5.2 Parts and Accessories 10
6. Maintenance and Support 10
6.1 Self test function 10
6.2 Checking the calibration on the anvil 10
6.3 Support Concept 10
6.4 Standard Warranty and Extended Warranty 10
7 Paperlink Software 11
7.1 Starting Paperlink 11
7.2 Viewing the data 11
7.3 Adjusting the max/min settings 13
7.4 Adjusting the date and time 13
7.5 Exporting data 13
7.6 Deleting and restoring data 14
7.7 Further Functions 14
7.8 Pre-define Roll IDs 15
7.9 Technical Information Paperlink software 15
To Next Page
Loading...
