ProCurve 2810-48G J9022A User Manual

Release Notes:
Version N.11.04 Software
for the ProCurve Series 2810 Switches
Release N.11.04 supports these switches:
■ ProCurve Switch 2810-24G (J9021A),
■ ProCurve Switch 2810-48G (J9022A)
These release notes include information on the following:
■ Downloading switch software and documentation from the Web (page 1)
■ Clarification of operating details for certain software features (page 8)
■ A listing of software enhancements in this release (page 8)
■ A listing of software fixes included in releases N.10.02 through N.11.04 (page 12)
Related Publications
For the latest version of the product documentation foryour switch, visit the ProCurve Networking
Web site at www.procurve.com
. Click on Technical support, then Product manuals.

ProCurve 2810-48G J9022A Specifications

General

Ports	48 x 10/100/1000
Uplink Ports	4 x SFP (mini-GBIC)
Switching Capacity	104 Gbps
Rack Mountable	Yes
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Management	Web-based
Remote Management Protocol	SNMP 1, 2c, 3
Features	VLAN support, QoS, IGMP snooping, port mirroring, broadcast storm control, Jumbo Frame support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3x
Operating Temperature	0 to 50 °C
Operating Humidity	15% to 95% non-condensing
Layer	L2
Voltage Required	100-240 VAC